Technology Breakthrough-Precision Machinery: High-Accuracy FPC Pogo Pin and Molding

Axis-Tec specializes in high-precision pogo pin and probe mold design and machining for advanced FPC and connector testing. With extensive experience in ultra-fine pitch structures, we support point-to-point, two-to-one, and Kelvin (four-wire) probing solutions for demanding electrical accuracy.

Our capabilities cover wire-type, blade-type, flat-type, and cantilever probe molds, enabling stable low-resistance contact, minimal probe marks, and long service life. Through precision machining and optimized structural design, Axis-Tec delivers reliable probe solutions tailored to customer-specific pitch, force, and UPH requirements.

70 μm Wire-Type Probe Mold

Testing Pitch 0.175 mm B2B Connector
Intrinsic Resistance: 0.68 Ω
Contact Force: 2.7 gf at 0.2 mm compression
First-Pass Yield: >99%
No probe marks observed under 30× microscope
Service Life: >50K cycles

80 μm Flat-Type Probe Mold

Testing Pitch 0.175 mm B2B Connector
Contact Resistance: <50 mΩ
Contact Force: 30 gf at 0.3 mm compression
First-Pass Yield: >99%
Overcurrent Capability: 3 A
No probe marks observed under 30× microscope
Service Life: >200K cycles

60 μm Flat-Type Probe Mold

Four-Wire Testing, Pitch 0.35 mm B2B Connector
Contact Resistance: <100 mΩ
Contact Force: 30 gf at 0.4 mm compression
First-Pass Yield: >99%
Overcurrent Capability: 1.5 A
No probe marks observed under 30× microscope
Service Life: >200K cycles

Kelvin Probe Mold

Four-Wire Testing, Pitch 0.35 mm B2B Connector Contact Resistance: <100 mΩ Contact Force: 30 gf at 0.5 mm compression First-Pass Yield: >99% No probe marks observed under 30× microscope Service Life: >200K cycles

Ultra-Fine Gold-Finger Probe Testing